DeepSeek V4 Flash 0731 Release: Benchmark Deep Dive
Lukas Vogel
Applied Research Editor

TLDRDeepSeek V4 Flash 0731 beats V4-Pro-Preview on nine agent benchmarks at $0.28/M output. What the release signals confirm and what they don't.
Analysis: Breaking Down the DeepSeek V4 Flash 0731 Release: A 284B Model at $0.28/M Output That Beats Its Bigger Sibling
DeepSeek did not rebuild V4 Flash. It retrained it. On July 31, 2026, the lab pushed an official deepseek-v4-flash checkpoint into public beta, kept the exact architecture and size of the April Preview, and reran only the post-training. The result, by DeepSeek's own numbers, clears its larger V4-Pro-Preview on all nine agent benchmarks it published.
TLDR DeepSeek V4 Flash 0731 is a 284B Mixture-of-Experts model with 13B active parameters, retrained (not rearchitected) from the April Preview, and now reportedly beats the bigger V4-Pro-Preview across nine agent benchmarks while costing $0.14/$0.28 per 1M input/output tokens. Independent evaluator Artificial Analysis scores it 50 on its Intelligence Index (#3 of 101), one point behind GLM-5.2, and flags a 3.7-point gap between DeepSeek's self-reported Terminal Bench score (82.7) and its own measurement (79). The agent numbers rely on a DeepSeek Harness that has not been released, so treat them as vendor-reported until reproduced.
Key Takeaways
- The 0731 release is a post-training-only upgrade: same 284B/13B structure as the Preview, per the official DeepSeek changelog.
- DeepSeek reports V4 Flash 0731 beating V4-Pro-Preview on nine agent benchmarks, with the largest swing on DeepSWE (7.3 → 54.4).
- Independent scoring from Artificial Analysis lands it at 50 on the Intelligence Index, #3 of 101, one point behind GLM-5.2.
- Pricing held flat from the Preview: $0.14 input / $0.28 output per 1M tokens, with a 98% cache-hit discount.
- The headline agent scores used an unreleased harness (DeepSeek Harness minimal mode), so they are not yet reproducible.
- Weights shipped MIT-licensed on Hugging Face, and community GGUF quants run on 110–168 GB of RAM within hours of release.
What Was Actually Shipped
The primary source is the DeepSeek API changelog dated 2026-07-31. It states plainly that the official deepseek-v4-flash API is in public beta, that the calling method is unchanged, and that agent capability now exceeds V4-Pro-Preview. The changelog lists nine benchmark figures and the sampling settings behind them.
The model card facts are corroborated across independent listings. The LM Studio model page and the Artificial Analysis analysis page both describe a 284B Mixture-of-Experts model with 13B active parameters and a 1M-token context window, released under the MIT license. That is the spine of the release. Everything else is either DeepSeek-reported or community-observed.
Here is the confirmed shape of the release:
- Size: 284B total parameters, 13B active per token (LM Studio, Artificial Analysis).
- Context: 1M tokens, up to 384K output tokens (DeepSeek pricing docs).
- License: MIT, weights on Hugging Face.
- Integration: native Responses API format, specifically adapted for Codex, per the changelog.
- Reasoning: three effort levels — low, high, max (LM Studio).
Same Structure, New Post-Training is the single most important line in this release, and it is the one DeepSeek states most directly.
Why the "Retrain, Not Rebuild" Framing Matters
DeepSeek's changelog says V4-Flash-0731 "keeps the same model architecture and size as DeepSeek-V4-Flash-Preview, and was only re-post-trained." That has three practical consequences for anyone running it.
First, cost and latency profiles should be stable. No parameter-count change means no reason to expect a new price tier, and none was announced — pricing held flat from April. Second, prompt behavior may shift underneath you. Post-training is precisely what changes tool-calling style, refusal behavior, and verbosity, so brittle agent scaffolding is worth re-running this week. Third, self-hosters are unaffected until new weights land; this was an API-side upgrade first, though community GGUFs followed within hours.
The size story is the quotable part. V4-Pro-Preview is a 1.6T-total, 49B-active model, as documented in a third-party V4 review. The Flash retrain, at 284B total and 13B active, reportedly passes it on every published agent benchmark. On the limited evidence so far, DeepSeek V4 Flash 0731 appears to trade raw scale for a sharper post-training recipe — but the numbers rest on a harness nobody outside the lab can run yet.
The Agent Benchmarks DeepSeek Published
All nine figures below come from DeepSeek's own July 31 changelog entry. They are vendor-reported. The relevant methodology caveat is in the source: for the public code-agent tasks, DeepSeek evaluated with the DeepSeek Harness minimal mode (announced as forthcoming) at max effort, top_p = 0.95, temperature = 1.0. Agent scores are unusually sensitive to the harness, so treat these as claims until reproduced.
| Benchmark | V4 Flash 0731 | V4-Pro-Preview | What it measures |
|---|---|---|---|
| Terminal Bench 2.1 | 82.7 | 72.1 | Long-horizon terminal/shell tasks |
| NL2Repo | 54.2 | 38.5 | Repo build from a natural-language spec |
| Cybergym | 76.7 | 52.7 | Security/CTF-style agent reasoning |
| DeepSWE | 54.4 | 12.8 | Real-world SWE issue resolution |
| Toolathlon (verified) | 70.3 | 55.9 | Multi-tool orchestration |
| Agent Last Exam | 25.2 | 16.5 | Hard open-ended agent reasoning |
| Automation Bench (Public) | 25.1 | 12.8 | End-to-end workflow automation |
| DSBench-FullStack † | 68.7 | 41.8 | Internal full-stack suite |
| DSBench-Hard † | 59.6 | 31.1 | Internal hard coding-agent suite |
Source: DeepSeek changelog and the LM Studio comparison table. The two † rows are internal DeepSeek test sets, not third-party comparable — read them as intent, not leaderboard.

Source: @xiaohu
The DeepSWE jump is the eye-catcher: 7.3 on the Preview to 54.4 on the retrain, a swing DeepSeek attributes to post-training alone. That is the kind of number that gets quoted, and it deserves a skeptical read until the harness is public.
DeepSeek V4 Flash 0731 vs V4-Pro-Preview: What the Reports Say
The most substantive comparison in public reporting so far is not against a rival lab. It is DeepSeek's own bigger model. Here is how the two line up on the dimensions the available sources actually support.
- Active parameters: 13B active / 284B total for Flash 0731, versus 49B active / 1.6T total for V4-Pro-Preview (third-party V4 review). Flash runs roughly a quarter of the active compute.
- Agent benchmarks: Flash reportedly leads on all nine DeepSeek-published suites, from a 10.6-point Terminal Bench gap to a 41.6-point DeepSWE gap (DeepSeek changelog). These are vendor-reported.
- Output price: $0.28 vs $0.87 per 1M tokens (DeepSeek pricing page). Flash is roughly a third of Pro's output cost.
- Responses API: native on Flash, not yet on Pro — DeepSeek's pricing docs note Responses API support for
deepseek-v4-prois planned for early August 2026. - Long-context reasoning: unverified — no shared benchmark published so far settles it. One architectural critique circulating on X argues Flash's limited full-attention layers weaken long-context reasoning relative to Kimi K3, but that is a single-source claim, unverified.
The tidy narrative — smaller model beats bigger sibling — is real in DeepSeek's numbers but leans entirely on those numbers. The independent data tells a slightly more modest story.
Where the Independent Numbers Diverge
Artificial Analysis ran V4 Flash 0731 through its own framework the same day. Its analysis page puts the model at 50 on the Intelligence Index, ranking it #3 of 101 for intelligence and #22 of 101 on price. That is a 10-point jump over the April V4 Flash and 6 points ahead of V4 Pro on the same index.
Two divergences are worth pinning. First, on Terminal Bench 2.1, DeepSeek self-reports 82.7 while Artificial Analysis measured 79 — a 3.7-point gap on the same benchmark, appearing only on DeepSeek's own row while Claude Opus 4.8 reads identically (85) across both. That is the harness sensitivity the changelog warned about, made visible. Second, DeepSeek's promotional framing claimed it beat GLM-5.2 across eight benchmarks, yet on the Artificial Analysis index GLM-5.2 sits at 51, one point ahead of Flash. Both can be true; they are different tests. The lesson is to name your harness before you name your winner.
Why This Matters for Builders
The economics are the story more than the leaderboard position. DeepSeek's pricing page lists $0.14 per 1M input tokens on a cache miss, $0.0028 on a cache hit, and $0.28 per 1M output. That cache-hit price is a 98% discount, and Artificial Analysis flagged it as unusually deep against an industry norm nearer 90%. For a Codex-style loop that queries the same repository repeatedly, hit rates run high naturally, which is where the reported ~$0.03 average cost per task comes from.
Community reports line up with the price story. One r/LocalLLaMA thread called the 14¢ in / 28¢ out pricing "insanely inexpensive for the size + capability," noting a competing model at 3× the cost. A DeepSeek subreddit writeup reported spending 110M tokens in a day for $0.77 and rated it on par with GLM-5.2 for agentic work. Not everyone agrees on the ceiling — a separate opencodeCLI thread praised its 100–150 TPS speed while noting it "needs reminding" on current tooling.
If you want to benchmark it against a comparable frontier chat model before committing an agent pipeline, you can run the same eval on something like Kimi K3 and compare cost per task directly. Do not take the ~$0.03/task figure on faith; measure it on your own workload.
What We Know vs. What We Don't
Google reads each of these in isolation, so treat them as standalone facts.
What we know:
- DeepSeek V4 Flash 0731's official API entered public beta on July 31, 2026, with
deepseek-v4-flashpointing to the new version (DeepSeek changelog). - DeepSeek V4 Flash 0731 is a 284B-parameter MoE model with 13B active parameters (LM Studio, Artificial Analysis).
- DeepSeek V4 Flash 0731 keeps the same architecture and size as the Preview and was only re-post-trained (DeepSeek changelog).
- DeepSeek V4 Flash 0731 is priced at $0.14/$0.28 per 1M input/output tokens with a $0.0028 cache-hit rate (DeepSeek pricing page).
- DeepSeek V4 Flash 0731 scores 50 on the Artificial Analysis Intelligence Index, ranking #3 of 101 (Artificial Analysis).
- DeepSeek V4 Flash 0731 is released under the MIT license with weights on Hugging Face (LM Studio).
- DeepSeek V4 Flash 0731 natively supports the Responses API and is adapted for Codex (DeepSeek changelog).
What we don't:
- The DeepSeek agent scores used an unreleased DeepSeek Harness minimal mode, so they are not yet independently reproducible (DeepSeek changelog).
- DeepSeek V4-Pro's own upgrade has no announced date; DeepSeek only says an official release "will follow soon" (DeepSeek changelog).
- DeepSeek V4 Flash 0731's vision/multimodal support is unconfirmed; the Artificial Analysis listing shows text-only I/O.
- Whether V4-Pro was permanently deprecated is unverified — NVIDIA NIM forum users reported both models removed, with no official confirmation.
- Long-context reasoning quality versus Kimi K3 rests on a single-source architectural critique, unverified.
- The reported ~$0.03 average cost per task depends on a ~99% cache-hit assumption that will vary by workload.
What to Watch Next
Three concrete signals will tell you whether the headline numbers hold. Watch for DeepSeek to publish the DeepSeek Harness minimal mode, since the agent scores cannot be reproduced without it. Run your own coding eval before relying on the DeepSWE 54.4 or Terminal Bench 82.7 figures — the 3.7-point Artificial Analysis gap shows how much the harness moves the result. And pin the V4-Pro situation: check whether DeepSeek clarifies the reported NIM deprecation and whether the promised official V4-Pro release actually lands.
Try related models on Kie.ai: Gemini 3.8 Flash, OpenAI Codex and GPT-5.6.
About Lukas Vogel
Lukas reads the papers and model cards so you do not have to, focusing on reproducible claims.
View all posts by Lukas Vogel